10kW~16kW Single-Phase Low Voltage Hybrid Inverter
- Max. 275A charge/discharge for high-rate battery support
-
3 MPPTs with 150% PV oversizing for higher yield
-
Wide MPPT range (120~480V) for complex rooftop design
-
Supports generator & smart load, parallel up to 6 Units
-
<10ms UPS-Level switching for critical load continuity
-
AC coupling is ready for easy retrofit and system upgrade
High-Capacity, Durable & Reliable, Flexible
SSE-HL10~16K-P1EU-S
High-Capacity, Durable & Reliable, Flexible
Equipped with 3 independent MPPTs and 150% PV oversizing capability, it maximizes solar harvest even in low-light conditions. The inverter also offers flexible integration, supporting AC coupling, generator connectivity, and smart load control. For expanded power requirements, it allows parallel operation of up to 6 units.
Built to endure challenging environments, its IP65-rated enclosure ensures dependable performance in various weather conditions,
System Diagram
SSE-HL10-16K-P1EU-S series hybrid inverters are used for energy storage systems with battery, load and grid. The energy produced by the PV system will be used to optimize self-consumption, the excess energy will charge the battery and the surplus can be fed into the grid. The battery will be discharged to support loads when the PV power is insufficient to meet self-consumption. If both the PV power and battery power are insufficient, the system will take power from the grid to support loads. The working mode depends on the PV power and user preference.
Related Parameters
| TECHNICAL SPECIFICATION | ||||
|
Model
|
SSE-HL10K-P1EU-S
|
SSE-HL12K-P1EU-S | SSE-HL14K-P1EU-S | SSE-HL16K-P1EU-S |
|
INVERTER INPUT/OUTPUT (GRID)
|
||||
|
Rated Power
|
10 kW | 12 kW | 14 kW | 16 kW |
|
Rated Voltage
|
220 / 230 / 240 V a.c., L+N+PE | |||
|
Rated Frequency
|
50 Hz / 60 Hz | |||
|
Power Factor Range
|
0.8 leading ~ 0.8 lagging
|
|||
|
Switch Time
|
< 10ms | |||
|
Current (Maximum Continuous)
|
43.5 A a.c. | 52.2 A a.c. | 60.9 A a.c. | 69.6 A a.c. |
|
Max. Output Overcurrent Protection
|
100 A a.c. | |||
|
BATTERY
|
||||
|
Battery Type
|
Lithium / Lead-acid
|
|||
|
Battery Voltage Range
|
40~60 V d.c. | |||
|
Rated Battery Voltage
|
51.2 V d.c. | |||
|
Max. Charge Current
|
220 A d.c. | 250 A d.c. | 275 A d.c. | 275 A d.c. |
|
Max. Discharge Current
|
220 A d.c. | 250 A d.c. | 275 A d.c. | 275 A d.c. |
|
Reverse Connect Protection
|
Yes | |||
|
PV INPUT
|
||||
|
No. of MPPT Tracker / Strings
|
3 / 2+2+2 | |||
|
Max. PV Array Power
|
15 kW | 18 kW | 21 kW | 22.5 kW |
|
Max. DC Voltage
|
550 V d.c. | |||
|
MPPT Voltage Range
|
120~480 V d.c. | |||
|
Start-up Voltage
|
120 V d.c. | |||
|
Max. Input Current
|
3*26 A d.c. | |||
|
Isc PV (Absolute Maximum)
|
3*39 A d.c. | |||
|
AC OUTPUT (EPS)
|
||||
|
EPS Rated Output Voltage
|
220 / 230 / 240 V a.c., L+N+PE | |||
|
EPS Rated Output Frequency
|
50 Hz / 60 Hz | |||
|
EPS Rated Output Active Power
|
10 kW | 12 kW | 14 kW | 16 kW |
|
EPS Rated Output Apparent Power
|
10 kVA | 12 kVA | 14 kVA | 16 kVA |
|
EPS Rated Output Current
|
43.5 A a.c. | 52.2 A a.c. | 60.9 A a.c. | 69.6 A a.c. |
|
Overload Capacity (Off Grid)
|
200% (<10s) / 150% (60s) | |||
|
EFFICIENCY
|
||||
|
MPPT Efficiency
|
99.90% | |||
|
Euro-efficiency
|
96.50% | |||
|
Max. Efficiency
|
97.30% | |||
|
PROTECTION & FEATURE
|
||||
|
Insulation Monitoring
|
Yes | |||
|
Residual Current Monitoring
|
Yes | |||
|
Parallel Function
|
Yes | |||
|
Protection Degree
|
IP65 | |||
|
Certifications
|
IEC 62109-1/2, IEC 62477-1, IEC 61000-6-1, IEC 61000-6-3, EN 50549-1&-10, NRS 097-2-1, ABNT NBR 16149, IEC 61727, IEC 61683, IEC 62116, etc. |
|||
|
Other Protection
|
Output over voltage, Output over current, Short circuit, Surge, Temperature
|
|||
|
GENERAL PARAMETER
|
||||
|
Storage Temperature
|
-25°C ~ +60°C
|
|||
|
Operating Temperature
|
-25°C ~ +60°C (Linely derating to 60% when exceed +45°C ~ +60°C
|
|||
|
Humidity
|
0~100% % (Non-condensing)
|
|||
|
Altitude
|
4000 m (>2000 m Derating)
|
|||
|
Noise
|
<50 dB | |||
|
Machine Dimension (W*H*D)
|
466*600*252 mm | |||
|
Machine Weight / N.W.
|
40 kg | |||
|
DISPLAY & COMMUNICATION
|
||||
|
Display
|
LCD+APP | |||
|
Interface
|
RS485 / WiFi / CAN / Bluetooth (Optional: LAN / Meter)
|
|||
|
||||
Application Scenario