• Ti 28 series DSP ensures fast, stable, and reliable operation.
• Fast switch time (<10ms) ensures seamless power.
• Wide MPPT voltage range: 15V~450V d.c.
• Supports bidirectional DC soft start, extending service life.
• Built-in MPPT solar charge controller.
Safety, Reliability, Compatibility, Efficiency
The SSA-HL1.2~6.5K-P1EU is designed for residential energy storage and backup. Its MPPT voltage ranges from 15V to 450V, and the maximum charging current is 160A. It also supports bidirectional DC soft start, reducing damage to the battery pack and extending service life.
This diagram shows the 1.2~6.5kW inverter system: DC power from the PV array, generator and the utility goes through the inverter. The inverter then converts DC to AC, which is filtered and stabilized, before outputting clean AC power to the battery and general loads.
| TECHNICAL SPECIFICATION |
|||||
| Model | SSA-HL1K2-P1EU | SSA-HL2K-P1EU | SSA-HL3K6-P1EU | SSA-HL5K-P1EU_DO-E | SSA-HL6K5-P1EU_DO |
| AC INPUT |
|||||
| Rated Voltage | 208 / 220 / 230 / 240 V a.c., L+N+PE | ||||
| Rated Frequency | 50 Hz / 60 Hz | ||||
| Maximum Continuous Current (Bypass mode) | 10 A a. c. | 17 A a. c. | 20 A a. c. | 40 A a. c. | 40 A a. c. |
| INVERTER OUTPUT |
|||||
| Rated Power | 1.2 kW | 2 kW | 3.6 kW | 5 kW | 6.5 kW |
| Rated Voltage | 208 / 220 / 230 / 240 V a.c., L+N+PE | 208 / 220 / 230 / 240 V a.c., L1+N1+L2+N2+PE | |||
| Power Factor | 1 | ||||
| Wave Form | Pure Sine Wave | ||||
| Switch Time | <10 ms (Typical) | ||||
| Inverter Efficiency (Peak) | 90.5%@12 V d. c. | 91%@12 V d. c. | 92.7%@24 V d. c. | 93.5%@48 V d. c. | 94%@48 V d. c. |
| Maximum Continuous Current | 5.2 A a. c. | 8.7 A a. c. | 15.6 A a. c. | 22.7 A a. c. | 27.3A a. c. |
| Maximum Output Overcurrent Protection |
102% ~ 110% 1min / 110% ~ 130% 10s / 130% ~ 150% 3s / 150% 0.2s |
102% ~ 120% 1min / > 120% 10s |
|||
| BATTERY |
|||||
| Battery Type | Lithium / Lead-acid | ||||
| Rated Battery Voltage | 12 V d. c. | 12 V d. c. | 24 V d. c. | 24 V d. c. | 51.2 V d. c. |
| Rated Voltage Range | 10 ~ 15 V d. c. | 10 ~ 15 V d. c. | 21 ~ 30.2 V d. c. | 21 ~ 30.2 V d. c. | 42 ~ 56.4 V d. c. |
| Max. Charge Current | 120 A d. c. | 100 A d. c. | 100 A d. c. | 160 A d. c. | 120 A d. c. |
| PV INPUT |
|||||
| No. of MPPT Tracker/Strings | 1 / 1 | ||||
| Max. PV Array Power | 1kW | 3kW | 5 kW | 9 kW | 9 kW |
| Max. DC Voltage | 125 V d. c. | 450 V d. c. | 500 V d. c. | 500 V d. c. | 500 V d. c. |
| MPPT Voltage Range | 15 ~ 100 V d. c. | 30 ~ 400 V d. c. | 40~450 V d. c. | 60 ~ 450 V d. c. | 60 ~ 450 V d. c. |
| Start-up Voltage | 20 V d. c. | 40 V d. c. | 60 V d. c. | 80 V d. c. | 80 V d. c. |
| MPPT Maximum Charge Current | 60 A d. c. | 100 A d. c. | 100 A d. c. | 160 A d. c. | 120 A d. c. |
| Max. Input Current | 14 A d. c. | 18 A d. c. | 18 A d. c. | 27 A d. c. | 27 A d. c. |
| Isc PV (Absolute Maximum) | 15 A d. c. | 22 A d. c. | 22 A d. c. | 30 A d. c. | 30 A d. c. |
| PROTECTION & FEATURE |
|||||
| Parallel Function | No | No | No | No | Yes |
| Protection Degree | IP20, Indoor only | ||||
| Certifications | EN IEC 62109-1/2, EN IEC 61000-6-1/3 | EN IEC 62109-1, EN IEC 62109-2 | |||
| Other Protection | Over voltage Protection, Overload Protection, Short-circuit Protection, Over temperature Protection, Surge Protection | ||||
| GENERAL PARAMETER |
|||||
| Storage Temperature | -15℃ ~ +60℃ | ||||
| Operating Temperature | -10℃ ~ +50℃ | -10℃ ~ +60℃ | |||
| Humidity | 20% ~ 95% (Non-condensing) | ||||
| Operating Altitude | 4000 m (>1000 m, Derating) | ||||
| Warranty | 2 years | ||||
| Noise | <50 dB | <55 dB | |||
| Machine Dimensions (W*H*D) | 228*330*90 mm | 270*311*100 mm | 285*435*100 mm | 334*413*116 mm | 334*413*116 mm |
| Machine Weight / N.W. | 3.2 kg | 4.5 kg | 6.5 kg | 8.8 kg | 8.8 kg |
| DISPLAY AND COMMUNICATION |
|||||
| Display | LCD Display | ||||
| Interface | RS485 / CAN / Dry Contact / WiFi (Optional) | ||||
|
|||||