• High efficiency up to 99.5% for optimal performance.
• Fast switch time (<10ms) ensures seamless power.
• Wide MPPT voltage range: 120V-500V d.c.
• Supports 40V-60V lithium and lead-acid batteries.
• BMS communication & remote monitoring via APP or Web.
Safety, Reliability, Compatibility, Efficiency
SSE-HL8K~15K-P2US
8kW~15kW | Split Phase | Low Voltage | IP65
The SSE-HL8K~15K-P2US energy storage inverter enjoys a variety of intelligent working modes. It supports BMS comminucation and remore monitoring via APP or Web. IP65 protection degree, fanless design for longer lifespan. 10-year warranty.
System Diagram
This diagram shows the 8kW~15kW inverter system: DC power from the battery, diesel generator and PV array goes through safety fuses and relays, a DC isolation switch, and capacitors. The inverter then converts DC to AC, which is filtered and stabilized, before outputting clean AC power to the grid and loads.
Application Scenario
Related Parameters
TECHNICAL SPECIFICATION | ||||
Model | SSE-HL8K-P2US | SSE-HL10K-P2US | SSE-HL12K-P2US | SSE-HL15K-P2US |
INVERTER INPUT /OUTPUT (GRID) | ||||
Rated Power | 8 kW | 10 kW | 12 kW | 15 kW |
Voltage (Nominal or Range) | 120V a.c./240V a.c.(Split Phase), 208V a.c.(2/3Phase) | |||
Frequency (Nominal or Range) | 50/60 Hz(±5H2) | |||
Power Factor Range | 0.8 leading~ 0.8 lagging | |||
Wave Form | Pure Sine Wave | |||
Switch Time | <10 ms | |||
Current (Maximum Continuous) | 33.4A a.c. | 41.7A a.c. | 50A a.c. | 62.5 A a.c. |
Max. Output Overcurrent Protection | 250V a.c. /100A a.c. | |||
BATTERY | ||||
Battery Type | Lithium / Lead-acid | |||
Battery Voltage Range | 40~60V d.c. | |||
Nominal Battery Voltage | 48V d.c. | |||
Max. Charge Current | 167A d.c. | 210A d.c. | 250A d.c. | 257A d.c. |
Max. Discharge Current | 167A d.c. | 210A d.c. | 250A d.c. | 257A d.c. |
Reverse Connect Protection | Yes | |||
PV INPUT | ||||
No. of MPPT Tracker/Strings | 2/2+2 | 3/2+2+2 | 3/2+2+2 | 3/2+2+2 |
Max. PV Array Power | 12 kW | 15 kW | 18 kW | 22.5 kW |
Max. DC Voltage | 525V d.c. | |||
MPPT Voltage Range | 120~500V d.c. | |||
Start-up Voltage | 100V d.c. | |||
Max. Input Current | 26 +26 +26A d.c. | |||
Isc PV (Absolute Maximum) | 39A | |||
AC OUTPUT(EPS) | ||||
EPS Rated Output Voltage | 120 /240 Ya.c.(Split Phase), 208V a.c.(2/3Phase) | |||
EPS Rated Output Frequency | 50/60 Hz | |||
EPS Rated Output Active Power | 8 kW | 10 kW | 12 kW | 15 kW |
EPS Rated Output Apparent Power | 8 kVA | 10 kVA | 12 kVA | 15 kVA |
EPS Rated Output Current | 33.4A a.c. | 41.7A a.c. | 50A a.c. | 62.5A a.c. |
EPS Output Power Factor | 0.8 leading-0.8lagging | |||
Overload Capacity | 200% 10s | |||
EPS Output Inrush Current | 200A a.c. | |||
EPS Max Output Fault Current | 200A a.c. | |||
EFFICIENCY | ||||
MPPT Efficiency | 99.50% | |||
California-efficiency | 96.50% | |||
Max, Efficiency | 97.50% | |||
PROTECTION & FEATURE | ||||
Insulation Monitoring | Yes | |||
Residual Current Monitoring | Yes | |||
Parallel Function | Yes | |||
Protection Degree | IP 65 | |||
Certifications | CE、RCM、CQC | |||
Other Protection | Overload, Over temperature, Short circuit protection, Anti-islanding | |||
GENERAL PARAMETER | ||||
Storage Temperature | -25°C~+60C | |||
Operating Temperature | -25°C ~ 60°C (Linely derating to 60% when exceed +45 "C ~ +60C) | |||
Humidity | 0-95%(Non-condensing) | |||
Altitude | 4,000m (>2,000 m Derating) | |||
Noise | <45 dB | |||
Dimensions(L*W*H) | 450*240*700 mm | |||
Shipping Dimensions (L*W*H) | 500*350*800 mm | |||
Machine Weight/ N.W. | 45 kg | |||
DISPLAY & COMMUNICATION | ||||
Display | LED/APP | |||
Interface | RS485/WiFi/CAN (Optional: Bluetooth/LAN/4G/Meter) |